Leather Protectors and Glove Liners

Leather Protector Gloves should always be worn over Insulating Rubber Gloves to provide the needed mechanical protection against cuts, abrasions and punctures. The ILP Series is manufactured from top grain cowhide or goatskin. Cowhide cuffs are tough leather on palm side and orange vinyl on the back, while the goatskin cuffs are green leather on palm side and orange vinyl on back. The ILP10 gloves do not have a cuff. Full complement of styles from low-volt through 16” contour cuff. C omes in dual sizes 7/7.5 through 11/11.5 and 12. Protectors for Class 00 and 0 are available with non-metallic buckle and pull strap or elastic wrist. It is the responsibility of the purchaser to specify the overall length of the protector gloves. The Clearance Table shows the minimum distance which shall be allowed between the top of the protector glove cuff and the top end of the bead of the rubber glove per ASTM F496 Specifications.

WARNING: Do not use leather protectors alone for protection against electric shock. Serious injury or death will result. Always use proper insulating rubber gloves. Proper care of leather protectors is essential to user safety. Inspect the leather protectors when inspecting rubber gloves. Metal particles, imbedded wire, abrasive materials or any substance that could physically damage the rubber gloves must be removed from the protector before use.

Leather Protectors

Cat. No of Cow Goat OAL Length in. (mm) Weight lbs. (kgs)
ILP3S ILPG3S 12 (305) 1 (.5)
ILP5S ILPG5S 14 (356) 1.2 (.5)
ILP7C ILPG7C 16 (406) 1.5 (.7)
ILP10 ILPG10 10 (254) .7 (.32)
ILP10A ILPG10A 10 (254) .7 (.32)

Leather Protector Clearance Table

Glove Class Min. Distance Between Top of Protectors and Rubber Gloves
in. mm
00,0 1/2 13
2 2 51

Liner Gloves reduce the discomfort of wearing Insulating Rubber Gloves in all seasons. For year round use, liners provide warmth in cold weather, while they absorb perspiration in the warm months. Many styles and fabrics are available with either a open or knit wrist. The knit wrist style grips the wrist rather than allowing the cuff to roll down and bunch at the palm. All Liner Gloves are for year round use with Insulating Rubber Gloves and Mittens. All liners are made from stretch fabric that can fit any hand size. The L Series has a tough outer cotton fabric while the inner lining is soft and comfortable. The LMKC Series is light, airy and allows ease of movement. The LMKW Series is made from a Rag Wool fabric that moves easily yet gives a substantial layer of lining.

Liner Gloves 

Cat. No Cow Description OAL Length in. (mm) Weight lbs. (kgs) Weight ea. Lbs (kgs)
L10JK Jersey Style, Light Weight, Seams Out Knit 10 ( 254 ) .14 (.06)
L12J Jersey Style, Light Weight, Seams Out Open 12 ( 305 ) .14 (.07)
L10MKW Machine Knit, Cotton/Wool Blend Knit 10 ( 254 ) .14 (.06)


Social Media